A $250 cleaning fee is not a $250 truck-service bill

The advertised filter fee does not establish what removal, reinstallation, required hardware, diagnostics or transport will cost. Add only charges that are not already included. For a fair comparison, request the same scope in both written quotes.

With our confirmed $800 service price as the reference, the arithmetic below shows when the alternative reaches or exceeds that amount. It does not assume that every provider charges the same extras or that MAG has no additional charges.

Published filter-cleaning feeAdditional quoted charges that bring the total to $800When the service bill is above $800
$185$615When additional charges exceed $615.
$250$550When additional charges exceed $550.
$350$450When additional charges exceed $450.

Why choose our on-truck hydrogen-assisted service?

Our main DPF stays on the truck during cleaning. That can avoid the separate removal/reinstallation job and the need to send the filter to another facility. Fewer handling and transport steps are practical benefits when this service fits the diagnosed condition.

Cleaning normally takes 2–3 hours. Coordinate your maintenance window with us so your truck can return to work with less interruption. We confirm the needed work, any separate repairs and the appointment before service.

What each DPF cleaning method does

“Pressure cleaning” is not one process. Controlled air pulses and specialized liquid washing are different techniques. Air cleaning is also commonly combined with baking, so the categories can overlap. Ask which stages are included.

Choose the process after diagnosis and follow the instructions for the particular engine and filter. Do not treat an ordinary pressure washer, hydrogen gas alone or a forced regeneration as interchangeable substitutes for professional ash removal.

MethodProcessWhat to confirm
Thermal baking + pneumatic cleaningControlled heat addresses combustible deposits; the cleaning stage removes and captures remaining ash.Filter removal, cleaning stages, inspection, cooling and reinstallation. Baking alone does not eliminate mineral ash.
Pneumatic: controlled airPurpose-built equipment pulses air through a removed filter and captures dislodged material.Whether baking is needed too. A combined bake-and-air price is not an air-only price.
Aqueous: specialized liquid cleaningDedicated equipment uses liquid and appropriate cleaner, followed by drying and inspection.Filter compatibility, contamination limits and complete drying; not an ordinary high-pressure wash.
MAG hydrogen-assisted DPF serviceOur service combines hydrogen technology and specialized DPF treatment while the DPF remains installed.Diagnostic scope and final checks. The DPF treatment, rather than hydrogen gas alone, must address the filter deposits.

Donaldson equipment guide · Filtertherm aqueous equipment manual · Carbon B-Gone

Published prices: a cleaning fee is not the complete truck bill

These providers advertise different scopes. Vehicle labor and transport are not established as included in the filter-cleaning menus below. The hydrogen-and-chemical example covers multiple systems, so its price is not equivalent to a DPF-only service or our quote.

Provider / methodPublished USD priceAdvertised scope
Aftermarket DPF · Stage 2$185Pneumatic cleaning plus thermal baking.
NW Emissions · DPF bake$250DPF bake; DOC is separately priced.
NW Emissions · DPF aqueous$350Water-based DPF cleaning; confirm vehicle-service extras.
USA DPF Cleaning · Tip-to-Tail$995Inspection and DPF/SCR/combustion service using hydrogen and chemical technologies. Broader scope; not our price.
Moving Action Group$800Owner-confirmed on-truck hydrogen-assisted service price. Confirm the included scope and any travel/taxes.

Visible costs: request the same itemized quote for all three options

Ask for quantities, unit prices and whether each line is included in the cleaning fee. Do not add an included item a second time. Clamps, gaskets and supplies depend on the truck and work performed; a fixed allowance without the correct parts and scope is not a reliable quote.

Clamps and gaskets are separate items. Replacement depends on condition and the manufacturer’s instructions; it is not automatically necessary in every job. On-truck cleaning avoids removal of the main DPF assembly, but access work, seals, consumables and repairs can still cost money.

Cost itemBaking + airAir / aqueous cleaningMAG on-truck service
Cleaning feeConfirm the bake, air stage and inspection included.Identify air-only, liquid washing or combined stages.Quote the hydrogen-assisted service and specialized DPF treatment.
LaborRemoval + reinstallation hours × hourly rate.Removal + reinstallation hours × hourly rate for the quoted off-truck process.Access, setup and treatment labor; the main DPF remains installed.
Clamps / V-band hardwarePart number, quantity and replacement requirement.Part number, quantity and replacement requirement.Any hardware needed for access or a separate repair; confirm inclusion.
Gaskets / sealsCorrect gasket kit and required new seals when reassembled.Correct gasket kit and required new seals when reassembled.Any access seals or other required parts; confirm inclusion.
Materials and consumablesCleaning materials, equipment-related charges and waste handling if separately billed.Approved cleaner, liquid treatment, drying and waste handling if separately billed.Specialized DPF cleaner/wash and other supplies used; confirm inclusion.
DiagnosticsFault evaluation and the underlying cause, not just a cleaning cycle.Fault evaluation and the underlying cause, not just a cleaning cycle.Confirm which diagnostic checks the quoted service includes.
Final verificationInspection, appropriate flow/pressure checks and any required vehicle procedure.Inspection, drying confirmation and appropriate final checks.Appropriate system checks and any required vehicle procedure.
Other parts / taxesSensors, damaged fittings or repairs only when needed; applicable taxes.Sensors, damaged fittings or repairs only when needed; applicable taxes.Separate needed repairs and applicable taxes from the cleaning quote.

Additional costs: transport, waiting and lost work

These are sometimes called hidden costs because they may be absent from the advertised cleaning price. They are not necessarily unexpected charges: ask the provider to identify them before approving the work.

For off-truck cleaning, confirm filter pickup, two-way delivery or shipping, packaging and insurance. If the truck cannot move safely, obtain a towing quote. For our workshop, include your trip to Upland; for mobile service, confirm the technician travel charge and availability.

Count the full window: scheduling, diagnosis, removal, transport, cleaning, cooling or drying, reinstallation and final checks. Some shops offer same-day service, so do not assume baking always takes several days. Our normal 2–3 hours refers to cleaning, not every delay or repair.

Estimate only work that truly cannot be recovered or reassigned. Use lost contribution after avoided variable costs, or the actual cost of a replacement vehicle. Do not charge both a rental and the same lost work if the rental lets you complete it. Add extra driver time or rescheduling costs only if actually incurred and not already counted.

Rush Truck Centers: service timing

How a $250 filter fee can become an $850 service bill

The following scenario keeps a real published $250 filter-cleaning fee, but its added charges and labor hours are hypothetical. It is not a received competitor quote or a typical market total. It illustrates why the complete service bill can exceed $800; MAG’s confirmed scope and any extras must also be included before calculating savings.

Hypothetical itemCalculation / USD
Cleaning$250
Labor2 hours × $150 = $300
Clamps and gaskets$90
Materials / supplies$40
Diagnosis and final checks$100
Additional transport$70
Estimated invoice total$850
Unrecoverable lost contribution6 hours × $75 = $450
Total operating impact$1,300

Soot, ash and filter condition determine the right job

Cummins distinguishes soot oxidation during regeneration from remaining ash that needs scheduled cleaning. Less soot is not proof of ash removal. Ask how the result will be checked against the instructions for your engine and filter.

Carbon B-Gone separates hydrogen engine cleaning from its DPF cleaner-and-wash treatment. Do not attribute mineral-ash removal to hydrogen gas alone or assume any method is approved for every manufacturer. A cracked or melted filter or an underlying engine or sensor fault needs the appropriate repair.

Cummins · Carbon B-Gone

Request the complete quote for your truck or fleet

Send the year, make, model, engine, mileage, fault codes or dashboard photo and truck location. Ask for cleaning, labor, clamps, gaskets, supplies, diagnosis, final checks, transport and the expected return-to-work time in one written quote.

Moving Action Group specializes in fleets and offers special fleet pricing. Tell us how many trucks need service and the available maintenance windows. Request your diagnostic review and quote, or call 909-236-1377. We confirm the scope and appointment with you.

Moving Action Group's green DPF cleaning equipment
Moving Action Group DPF cleaning equipment

Frequently asked questions

How much does DPF cleaning cost?

Our on-truck hydrogen-assisted DPF cleaning is $800. Filter-only cleaning fees published by off-truck shops start lower (the examples above are $185–$350), but they usually don't include removal, reinstallation, gaskets, clamps or transport. Compare the total job, not just the cleaning line.

Why is a $250 DPF bake not a $250 bill?

The bake price covers cleaning the filter once it's off the truck. Removal and reinstallation labor, new gaskets or clamps, diagnostics and getting the filter to and from the cleaner are usually billed separately. Ask every provider for the same itemized quote.

Does the $800 price include mobile travel?

Travel depends on where the truck is. We confirm any travel cost and applicable taxes in your written quote before we schedule, so there are no surprises on the invoice.

Do you offer fleet pricing for DPF cleaning?

Yes, we offer special fleet pricing, quoted per unit based on the vehicles, filter condition and location. Send the number of units, their makes and engines, and where they're parked for a quote. See fleet DPF cleaning.

How long does on-truck DPF cleaning take?

Cleaning normally takes 2–3 hours, depending on filter condition. Travel, diagnosis and any separate repairs are extra time.

Is cleaning cheaper than replacing a DPF?

Cleaning keeps the filter you already have, while replacement means a new filter plus installation. If diagnostics show the filter needs replacing, we tell you before any work and quote that instead. A cracked or melted filter can't be cleaned back into service, so we check the filter's condition before recommending either.

Our services

Sources