What DPF cleaning removes
A DPF traps particulate matter from the exhaust. During regeneration, the filter gets hot enough to burn the soot, converting it mainly to ash, carbon dioxide and water, according to EPA. Ash does not burn: it comes mostly from lubricating oil and fuel additives, and as it builds up it keeps raising exhaust backpressure. Periodic cleaning is what removes it.
That's why more regenerations are not a substitute for cleaning. See forced regeneration vs. DPF cleaning.
Signs a truck needs DPF cleaning
Common signs include more frequent or interrupted regenerations, power loss, higher fuel use and aftertreatment warnings. None of them proves the filter is the problem on its own, so we read the codes first. Two of the most common DPF codes are SPN 3719 (soot load) and SPN 3251 (differential pressure). More in signs of a restricted DPF.
On the truck or off the truck
Conventional cleaning removes the filter, bakes it in a cleaning station and blows the ash out with air and vacuum, then reinstalls it. Our process cleans the DPF while it stays installed, when its condition allows, at your yard or our Upland workshop, and normally takes 2–3 hours. Neither method fixes a cracked or melted filter. Full comparison: on-truck vs. off-truck DPF cleaning, and what to expect from cleaning without removal.
What DPF cleaning costs
Our on-truck DPF cleaning is $800. Off-truck shops often publish a lower filter-only fee, but removal, reinstallation, gaskets, clamps and transport are usually extra. Compare the whole job in our DPF cleaning cost guide.
How often to clean
There's no single mileage that fits every truck: ash loading depends on duty cycle, oil consumption and the engine. Follow the engine maker's service schedule and track your fleet's regeneration and pressure data. See fleet DPF maintenance intervals, plus our brand notes for Cummins and Detroit engines.
DPF cleaning and Clean Truck Check
A restricted DPF, or the fault codes that come with it, can show up in a Clean Truck Check OBD test. Deal with the cause before your test date. We are CARB-credentialed for OBD and opacity testing, so we can diagnose, clean and test. If a truck already failed, read what to do after a failed Clean Truck Check.
Where we work
Our mobile service reaches trucks within 120 miles of our workshop at 525 Central Ave, Suite 6A, Upland: the Inland Empire, Los Angeles County, Orange County, the High Desert and more. See the service area, or how fleet DPF cleaning works at your yard.
Frequently asked questions
What is DPF cleaning?
Maintenance that removes ash and other buildup from a diesel particulate filter. Regeneration burns soot, but ash doesn't burn, so the filter needs periodic cleaning.
Does regeneration clean the DPF?
Only partly. Regeneration converts soot mainly to ash, carbon dioxide and water. The ash stays in the filter until it's cleaned.
How much does DPF cleaning cost?
Our on-truck DPF cleaning is $800. Compare it with the full cost of off-truck cleaning in our cost guide.
Do you clean DPFs on the truck?
Yes, when the filter's condition allows. We clean it while it stays installed, at your yard or our Upland workshop. Cleaning normally takes 2–3 hours.
Which areas do you serve?
We serve trucks within 120 miles of Upland, including the Inland Empire, Los Angeles and Orange County. Call 909-236-1377 with your location to confirm.
