What SPN 4364 means
The SCR system injects diesel exhaust fluid (DEF) into the exhaust so the catalyst can convert NOx. An NOx sensor before the SCR and another after it let the engine computer compare the two readings. In Detroit's GHG14 bulletin, SPN 4364 FMI 18 sets when the aftertreatment control module detects that SCR NOx conversion efficiency is low, using those inlet and outlet NOx sensors.
OEM differences. Detroit lists no engine reaction (no derate) for this code, only the MIL. A Navistar bulletin for the A26 engine also describes no drivability issues or derates, and adds a different cause: ammonia slip that the outlet NOx sensor reads as NOx, biasing the reading. Check your engine maker's information for your truck.
Common FMI (Detroit GHG14)
From a Detroit service bulletin published through NHTSA:
- FMI 18: SCR NOx conversion efficiency low. Lamp: MIL. Engine reaction: none.
Symptoms
Usually just the check engine lamp; Detroit and the Navistar A26 bulletin list no derate for this code. That makes it easy to ignore, but a lit MIL fails Clean Truck Check, and some of the same causes, such as poor-quality DEF, can also trigger an SPN 5246 inducement and its derate.
Common causes
Detroit's bulletin lists these causes:
- Contaminated DEF
- Incorrect concentration of urea in the DEF
- A biased NOx sensor
- Excessive DEF build-up in the exhaust
How SPN 4364 is diagnosed
Detroit's procedure works in order. First, deal with any air, EGR, fuel or NOx sensor codes, because they can cause this one. Then test the DEF: a test strip, then a refractometer check that the urea concentration is between 31 and 34 percent. Then run a DEF dosing quantity test (Detroit's bulletin specifies 108 to 132 mL). Only after those checks does the catalyst itself come into question.
We connect to the truck's computer, read all active and stored codes, and check DEF quality and dosing before recommending parts. We diagnose SCR and DEF faults at your yard, and repairs such as NOx sensors, DEF dosers and DEF pumps are handled through our network of specialist partners, so you have one point of contact from diagnosis to retest. Bypassing or disabling SCR or DEF is illegal, and we don't offer it.
Clean Truck Check
CARB's OBD test fails a truck with a code currently commanding the MIL on, or with a stored permanent code. Repair the cause, let the monitors run, then retest; clearing codes can leave the truck “Not Ready.” See what to do after a failed Clean Truck Check. We are CARB-credentialed for OBD and opacity testing.
Get the truck looked at
Send us the code, FMI, engine make and the truck's location. We diagnose at your yard within 120 miles of Upland. See mobile service and fleet service, or call 909-236-1377.
Frequently asked questions
What does SPN 4364 FMI 18 mean?
Low SCR NOx conversion efficiency. On Detroit GHG14 engines it is detected by comparing the SCR inlet and outlet NOx sensors, and it turns on the MIL.
Is SPN 4364 a bad SCR catalyst?
Not necessarily. Detroit's listed causes include contaminated DEF, wrong urea concentration, a biased NOx sensor and DEF build-up in the exhaust. Those are checked before the catalyst.
Will SPN 4364 derate my truck?
Detroit's GHG14 bulletin lists no engine reaction for FMI 18, and Navistar's A26 bulletin describes no derates. Other engines may differ, and some SCR faults can lead to an inducement on certain trucks.
Will I fail Clean Truck Check with SPN 4364?
If it's commanding the check engine lamp on, yes: CARB's OBD test fails a truck with an active MIL-on code. Fix the cause, drive the truck so the monitors run, then retest.
Do you repair SCR and DEF systems?
Yes. We diagnose SCR and DEF faults at your yard, and repairs such as NOx sensors, DEF dosers and DEF pumps are handled through our network of specialist partners, so you have one point of contact from diagnosis to retest. Call 909-236-1377.
